Design an Ozone Generator by Using Dielectric Barrier Discharge

Authors

  • Hamid H Al-Jobouri Department of Physics, College of Science for Women, Baghdad University, Baghdad-Iraq
  • Hadeel O Ismaeel Department of Physics, College of Science for Women, Baghdad University, Baghdad-Iraq

Keywords:

ozone, Dielectric Barrier Discharge DBD, oxygen, non-Thermal plasma

Abstract

An Ozone generator was designed according to dielectric barrier discharge (DBD) technique with Oxygen as a feed gas for Ozone generating. The effect of the flow rate on the concentration of the Ozone was studied, the flow rate was varied from 0.6 to 5lit/ min for two values of the gap space between electrodes d= 2 and 4 mm, and two values of the electrode area A= 20 and 36 cm2. Also, the effect of the applied voltage on the concentration of the Ozone was studied, the applied voltage was varied from (1- 9 kV) for the same gap space and electrode area values. It is found that the concentration of Ozone produced increases with increasing voltage, and decreases with increasing flow rate.



Published

2018-07-03

Issue

Section

Articles

How to Cite

(1)
Design an Ozone Generator by Using Dielectric Barrier Discharge. ANJS 2018, 17 (1), 89-94.